Answer-page guide library
Australian trade guides linked to calculators
These guides are written for practical site planning. Each one links to relevant TradeSet calculators so you can move from explanation to action.
General guidance only. Verify with plans/engineer/local requirements.
- Guide
Standard Roof Pitch in Australia: Practical Guide for Builders and Roofers
A practical Australian reference for common roof pitch ranges, what they mean on site, and how to avoid ordering or set-out mistakes.
Read guide - Guide
Timber Stud Spacing in Australia: 450 vs 600 Centres Explained
A practical guide to timber stud spacing decisions, including take-off implications, lining coordination, and standards-aware planning notes.
Read guide - Guide
Concrete Piers: How to Calculate Volume and Australian Standard Considerations
A practical guide for calculating concrete piers, planning allowances, and keeping estimates aligned with Australian project documentation.
Read guide - Guide
Stair Stringer Calculations Explained for Australian Builders and Carpenters
A practical staircase set-out guide covering rise, run, stringer length, and how to avoid common recut errors on Australian sites.
Read guide - Guide
Rafter Length and Roof Pitch Explained: Practical Australian Set-Out Guide
A practical roof framing guide for converting rise/run into pitch and rafter length while avoiding common set-out and ordering errors.
Read guide