Convert length, area, volume and common trade units in one tap. TradeSet’s conversions sit in your Toolbox with the rest of your calculators—all offline.
This calculator is one tool inside the TradeSet app Toolbox: 18 calculators, jobs, history, and PDF export in one place.
Last updated: 18 February 2026
Metric units (mm/m) are used throughout, with Australian standards context where applicable.
Fast on-page input check using metric units for planning only.
Adjusted planning quantity is 111 units (base 100 with 10% allowance).
General guidance only. Verify with plans/engineer/local requirements.
This page is one calculator from the TradeSet Toolbox. Use the app to keep calculator history, attach results to jobs, and export clean PDFs from one place.
Open another tool now so your workflow stays in the same TradeSet calculator cluster.
Measurements Calculator
Add, subtract and convert running measurements—lengths and areas. Built for take-offs and quoting.
Open toolCheck Square Calculator
Check and set 90° with diagonal measurements. For setting out and squaring.
Open toolJob Cost Calculator
Material and labour cost for jobs. Quick quotes and tracking.
Open toolUnit Conversions is built for Australian tradies who need fast, practical answers while planning work, ordering materials, or checking quantities on site.
It supports metric workflows (mm/m) and helps you move from raw measurements to usable outputs without spreadsheet delay. Use this page as an answer resource first, then as a tool.
2,400 mm = 2.4 m, and 12.5 m2 = 12,500,000 mm2.
Unit Conversions gives fast planning outputs for measuring, ordering, and quoting tasks on Australian jobs in metric units.
No. Use outputs as general guidance only, then verify decisions against approved plans, engineering advice, and local requirements.
Yes. TradeSet is designed for on-site workflows where reception can be unreliable, with calculators and saved context available quickly.
Use these links to move from guide to calculator, then continue in the TradeSet app workflow.
Measurements Calculator
Add, subtract and convert running measurements—lengths and areas. Built for take-offs and quoting.
Open calculatorCheck Square Calculator
Check and set 90° with diagonal measurements. For setting out and squaring.
Open calculatorJob Cost Calculator
Material and labour cost for jobs. Quick quotes and tracking.
Open calculatorOutputs use metric units and are intended as general guidance for Australian site planning. Check NCC/AS and project-specific requirements for your situation.
General guidance only. Verify with plans/engineer/local requirements.